TV Mounting

Clean Walls, Clear Picture: Concealed TV Mounting in Metro Atlanta

Justin Stewart

Justin Stewart

— 3 min read
Share
Flat-screen TV mounted above a fireplace in a modern living room with a clean wall and no visible cords

Football season in Metro Atlanta means the living room is the main gathering spot again. New TVs show up for the holidays, old stands get cleared out, and a lot of homeowners finally want the screen on the wall—without a tangle of power and HDMI cords hanging down to the outlet.

Concealed TV mounting is how you get that clean look. The TV sits flush or on a tilt or full-motion mount, power and video run inside the wall, and the soundbar (if you use one) hangs neatly below. The result looks finished in a family room, a lobby, or a conference space.

Why Visible Cords Are Worth Fixing

Cords hanging from a wall-mounted TV do more than look unfinished. They catch dust, snag during cleaning, and can pull on the outlet or the back of the set. Over time they leave marks on paint and drywall. Kids and pets notice them. Guests notice them. A concealed install hides power and HDMI so the wall stays clean from the TV down to the furniture or the floor.

Drywall, Brick, and Fireplace Mounts

Not every wall is the same. A good mount starts with the surface and the structure behind it.

  • Drywall mounts need solid attachment to studs (or rated anchors where studs do not line up). Finding the studs, checking for wiring and plumbing, and hanging the bracket level keeps the set secure for years
  • Brick and masonry need masonry fasteners and a mount rated for the wall type. Holes are drilled carefully so the face of the brick stays neat
  • Fireplace mounts are common in Metro Atlanta living rooms, but heat and clearance matter. The TV should sit high enough for comfortable viewing and far enough from the firebox that heat does not stress the screen or the cables. We talk through mantel depth, seating distance, and how you actually use the fireplace before anything is drilled

New installs and pre-wired setups both work. If the room was wired during a remodel, we use the existing paths. If it was not, we plan clean cut-ins and fish wire so patches stay small and paintable.

In-Wall Power and HDMI Routing

A flush TV still needs power and a signal. The clean approach is to put a recessed power outlet and an HDMI (or multi-cable) pass-through behind the set, then run cable down inside the wall to a low opening near the cabinet, media console, or equipment niche.

  • In-wall power keeps the cord from dangling to a floor outlet
  • HDMI routing lets you keep the streaming stick, cable box, or game console in the cabinet instead of hanging off the TV
  • Soundbar brackets mount the bar under the screen so dialogue stays clear without a separate stand cluttering the mantel

That same approach scales to businesses. A lobby TV in Marietta or a conference display in Alpharetta looks more professional when the wall is blank except for the screen.

Safety Basics That Matter

TV mounting is not only about looks. Weight, fasteners, and clearance decide whether the install stays put.

  • Know the weight. Match the mount and fasteners to the TV and the wall type
  • Hit structure. Studs in drywall, proper masonry anchors in brick—surface screws alone are not enough for a large screen
  • Respect heat at fireplaces. Leave practical clearance from the firebox and avoid trapping heat behind the set
  • Plan cable paths. Power and low-voltage runs should stay separate where code and good practice call for it, and openings should be finished so the wall is sealed and neat

We walk the room with you first: seating height, glare from windows, where the furniture sits, and whether you want a fixed, tilting, or full-motion mount for cleanup and angle.

Homes, Lobbies, and Conference Rooms

Concealed mounting is not only for living rooms. A home in Roswell or Kennesaw might want a fireplace TV with in-wall power and a soundbar. A medical office in Sandy Springs or a small office suite in Smyrna might need a lobby screen and a conference-room display with HDMI routed to a table or credenza. The same principles apply—secure structure, clean cable paths, and a finish that matches how the space is used.

Plan Your TV Mount With AlphaLVC

AlphaLVC is a local, licensed low-voltage contractor (Georgia license LVU406567) serving homes and businesses across Metro Atlanta, including Acworth, Alpharetta, Atlanta, Brookhaven, Canton, Cartersville, Dallas, Dunwoody, Hiram, Johns Creek, Kennesaw, Mableton, Marietta, Roswell, Sandy Springs, Smyrna, and Woodstock. We handle new TV installations and pre-wired setups over drywall, brick, or fireplaces, with in-wall power, soundbar brackets, and HDMI routing so the wall stays clean.

You work with the same licensed installer from walkthrough to completion, with a clear recommendation for height, mount type, and cable paths instead of a hard sell.

Call or text 470-295-5382 or email info@alphalvc.com to schedule a TV mounting walkthrough. You can also visit alphalvc.com.

Read more